Punkt MP02 - Message Deletion and Backup Alternatives

23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Text messages (SMS) I
52
Replying to a message
• Press the Messages key and select a
message thread.
• Enter text in the “New message” box
(see p 11 for information about using
the MP02 keypad) and press the Down
key to access the Options menu.
• With the name of the recipient
highlighted, press the key again.
• The reply will now be sent, and a copy
will appear at the bottom of the
message thread.
• To add recipients, select Edit recipient.
Select Contacts as required, and/or
highlight Add number and enter a
phone number manually. Recipients of
this message will be marked with a
filled circle; pressing the key while
a recipient is highlighted will
alternately remove them from and
return them to the list.
• The other available options are to save
the reply as a draft for working on
later, inserting text from a template,
and deleting the entire thread.
Forwarding a message
• Select a single message from a thread,
as described previously.
• Open the Options menu and select
Forward.
• Add a recipient from the Contacts list
and/or by manually entering a phone
number. Recipients will be marked
with a filled circle; remove them by
selecting them again.
• Select Save.
• Check the recipient(s) and press the
key.
• The message will now be saved.
Deleting messages
⏤ Deleting a single message
• Press the Messages key.
• Select a Contact/phone number from
the Messages menu.
• Select the message to be deleted from
within the thread that appears, as
described above.
• Open the Options menu.
• Select Delete, and then select Yes to
confirm.
⏤ Deleting a whole message thread
• Press the Messages key.
• Select a Contact/phone number from
the Messages menu.
• When the thread appears, open the
Options menu and select Delete
thread, and then select Yes to confirm.
Using message templates
Message templates are pre-composed
pieces of text that can be used as or
inserted into text messages. The MP02
comes pre-loaded with a small collection
of templates; these can be edited and
saved for future use in their amended for,
and new templates can be created.
Templates can also be deleted if no longer
required.
⏤ Editing an existing template
• Open the Messages Menu by pressing
the Messages key.
• Select Templates, and select a
Template to edit.
• Add, delete or change text as desired.
(See p 11 for information about using
the MP02 keypad.)
• Open the Options menu by
long-pressing the Down key to reach
the end of the text and then pressing
it again.
• Select Save, or to cancel press the End
key.
⏤ Creating a new template
• From the Messages Menu, select
Templates and then New template.
• Enter the required text.
• With the cursor at the end of the
entered text (long-press the Down key
if necessary), open the Options Menu
and select Save. To abandon the
process, press the Back key or select
Delete.
⏤ Deleting a template
• From the Messages Menu, select
Templates, and then select a Template
to delete.
• Press the Down arrow to open the
Options Menu, select Delete, and then
select Yes to confirm.