Punkt MP02 - Call Management IV: Audio and Caller ID; Call Volume and Microphone Control; Hands-Free Speaker and Caller ID Management

23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Calls III
42
Call volume levels
• From the Main menu, select Settings, then
Sounds, then Calls volume.
• Use the Up and Down keys to make
callers’ voices louder or quieter, for both
the main speaker and the hands-free
speaker.
• Press the End key or the Back key to exit.
⏤ Adjusting the volume during a call
• Open the Options menu and select
Volume.
• Make the desired adjustment by pressing
the Up and Down keys. Long-press for
accelerated adjustment.
• Press the key to exit.
Using the hands-free speaker
• During a call, open the Options menu and
select Turn speaker on.
• If additional numbers have been entered
during the call, e.g. for navigating an
automated switchboard, these will need to
be cleared first. This can be done by
pressing the Back key; the call connection
will not be affected.
Muting the microphone
• From the Options menu, select Mute.
• To cancel, select Mute again.
Using external audio equipment (e.g.
an earpiece or an in-car system)
⏤ Connecting via Bluetooth
• While on a call, press the Back key until
the Home screen is displayed.
• From the Status menu, select Bluetooth is
off.
• Choose a connected Bluetooth device, or
search for devices.
• Press the Back key to return to the Home
screen, and a second time to return to
the screen displaying the current call.
• To switch back to the MP02’s built-in
speakers, select Switch audio.
⏤ Connecting via USB
The supplied USB-C earpiece, or another
compatible product, can be plugged directly
into the MP02’s USB socket.
Putting calls on hold
When a call is on hold, neither party can
hear the other. To put a call on hold, press
the Call key. To resume the call, press it
again.
Showing/hiding phone number on
outgoing calls
When a call is made, the caller’s phone
number (“caller ID”) is normally made
visible to the recipient.
Depending on the network provider, it is
usually possible to prevent this from
happening – this is known as “hiding caller
ID”.
⏤ To hide caller ID
• From the Main menu, select Settings, then
Calls, then Caller ID.
• Select the desired option. Set by network
will defer to the network provider’s
settings.