23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
First steps
9
How to use this manual
The MP02 is a relatively simple phone to use.
But it is very different to a smartphone, it
does not have a “Help” feature, and many of
its features are not readily guessable.
Therefore, it is necessary to learn its features
in a systematic manner.
This manual is designed to be worked through
in the order that it is written,
comprehensively and from start to finish. It
should be recognised as being primarily an
instruction manual rather than a reference
manual. Later sections will assume knowledge
of information presented in earlier sections –
especially the contents of Section One.
The end result is that the user learns exactly
how his/her entire phone works; a refreshing
change compared to the byzantine nature of a
smartphone’s operating system and apps.
The best way to use this manual is to do a
“dummy run”, entering temporary settings
and playing with the phone until each and
every feature is totally understood (even
features that are unlikely to be used) and then
finish off by doing a total reset.
Troubleshooting tips are available on the
Punkt. website. For any further questions, the
Punkt. customer care team will be happy to
help.
Using a new MP02 for the first time
Before an MP02 can be used phone for the
first time, the following steps need to be
taken:
• Insert a SIM card.
• Fully charge the battery.
• Turn the MP02 on.
• Follow the start-up process that will
automatically appear.
The MP02 is produced with a protective film
over the screen. Only remove this when it is
certain that the phone is not going to be
returned under the retailer’s returns policy.
To Next Page
Loading...
