EasyManua.ls Logo

Punkt MP02 - Entering Text IV: Characters and Deletion; Entering Numbers, Spaces, and Symbols; Deleting Text

Punkt MP02
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Entering text IV
33
Entering numbers
Individual numbers can be entered in
either predictive or multi-tap mode by
long-pressing the applicable key.
Alternatively, Numbers only mode can
be used. In this mode, the 1-9 keys
immediately enter their applicable
number and other characters are not
available. Long-pressing a key causes its
number to be entered repeatedly.
Entering a space
To enter a space between words, press
“0” when in either Predictive or
Multi-tap mode. (The secondary symbol
on the key denotes a space.)
This can be repeated to enter multiple
spaces.
Pressing the “0” key twice in quick
succession will cause a full stop to be
entered.
Entering other characters
Common punctuation marks can be
entered by repeatedly pressing the “1”
key. (The symbol on the key refers to
the voicemail speed-dial feature.)
The Star key gives access to the full
range of punctuation marks and special
characters. Pressing it repeatedly will
cycle through three grids of symbols.
Each symbol's grid is a representation
of the keypad . (The Star key is linked
to Next on each grid.)
The desired symbol can be entered by
pressing the key that equates to the
character’s position in the grid (each
character has a label in small, faint text
that identifies its linked key).
To exit the symbols grids without
entering a character, press the Back key
(or select “Return” in the third grid).
Symbols can also be entered by
scrolling through the grids and pressing
the key when a desired symbol is
highlighted.
Entering ideograms
Long-press the Star key to access the
MP02’s range of ideograms.
Two grids of ideograms are available; these
function in the same way as the symbols
grids described see above.
To exit the ideograms grids without
entering anything, press the Back key.
Deleting text
Delete a single character by briefly
pressing the Back key.
Delete all the entered text
simultaneously by long-pressing the
Back key.
Pressing the End key will cause entered
text to be discarded.

Table of Contents

Other manuals for Punkt MP02

Related product manuals