23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Resetting the MP02
26
Forced restart
If the MP02 stops responding, long-press
the On/Off button for at least ten
seconds. Also, ensure that it is within the
stated minimum and maximum operating
temperatures.
If this does not solve the problem, please
contact Punkt. Customer Services.
Deleting all Contacts
This will cause all information to be
deleted from the phone’s Contacts
directory.
Any vCard copies of the Contacts
directory stored on the phone will not be
deleted. These can be deleted by
connecting the MP02 to a computer,
either immediately after backing up or at
a later point, or by doing a total reset as
described in the next section. For more
information on vCard copies, see p 37. For
maximum security, overwrite these files.
Contact Punkt. for more information on
how to do this.
The rest of the phone (Settings, Notes,
Messages, etc.) are also not affected.
Warning: This process cannot be
cancelled or undone.
• From the Main menu, select Settings,
then Reset.
• Select Reset contacts.
• Confirm when prompted.
Deleting everything
This will cause everything on the phone
to be deleted, including any vCard copies
of the Contacts directory.
⏤ To remove all user settings and
permanently delete all user data and
vCard files.
Warning: This process cannot be
cancelled or undone.
• Create a backup copy of the Contacts
list, export it to a computer, and then
delete it from the MP02 (and any
others that may exist). Make a copy of
the most recent backup file and store
it elsewhere. (Always have at least two
separate copies of important data.)
See p 37 for information on how to do
this.
• From the Main menu, select Settings,
then Reset.
• Select Factory reset.
• Enter the phone passcode if passcode
protection has been activated.
• Confirm when prompted.
After a reset
When the phone is restarted, it will be
necessary to go through the standard
setting up procedure again.
To Next Page
Loading...
