Punkt MP02 - Contacts III: Storage and Sharing; Speed-dial Numbers and SIM Transfer; Sharing Contacts via SMS and Bluetooth

23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Contacts II
36
Speed-dial numbers
To assign a key to instantly calling a
Contact’s number:
• From the Main menu select Settings,
then Preferences, then Shortcuts.
• Select a number key and then Call
contact.
• Select a Contact, and if necessary a
specific number.
The “1” number key is reserved for
calling the voicemail service. For more
information on Shortcuts, see p 29.
Copying and moving Contacts
between the MP02’s memory and
the SIM card
Contact files can be stored in the MP02’s
memory, on the SIM card, or both. If
both, the Contact will appear in duplicate
in the Contacts list. (The copied version
will be listed below the original.) Any
subsequent modification to/deletion of
one of the entries will not be replicated in
the other.
Information from a Contact file can be
copied (original left unchanged where it
is) or moved (original is deleted)
between the MP02’s memory and the
SIM card. The SIM card can only store a
Contact’s name and phone number; if a
Contact is moved to it, all other
information will be lost. The direction
that a Contact file is copied or moved is
automatically defined by where the
original file is located.
⏤ Copying Contacts
• Press the Contacts key.
• Select a Contact.
• Select Options, then Copy to
phone/SIM.
⏤ Moving a Contact
• Press the Contacts key.
• Select a Contact.
• Select Options, then Move to phone/SIM.
• When advised about loss of
information (see above), select Yes (if
appropriate).
Sharing Contact information with
other devices
A Contact’s information can be sent to or
from someone else’s phone (or similar
device), either in a text message (SMS) or
via Bluetooth.
⏤ Sending Contact information via a
text message (SMS)
• Press the Contacts key.
• Select a Contact, then Options, then
Share via SMS. A text message will be
shown, containing the Contact’s
information (delimited by
semicolons).
• Press the Down key to open the
Options menu.
• Select Send and then select one or
more recipients. (Selected recipients
will be indicated by a solid circle.)
• Select Save.
• Open the Options menu again, and
select Send. (For more information
about text messages see p 51.)
⏤ Sending Contact information via
Bluetooth
• Pair the MP02 with the other device.
(For more information about
Bluetooth see p 28.)
• Press the Contacts key.
• Select a Contact, then Options, then
Share via Bluetooth.
• Follow the on-screen instructions.
⏤ Receiving Contact information via
Bluetooth
• Pair the MP02 with the other device.
(For more information about
Bluetooth see p 28.)
• On the other device, choose which
Contacts to send, and then send.
• An incoming file <filename.vcf>
Notification will appear on the
MP02’s Home screen; note its name
and select Accept.
• Press the Contacts key.
• Select Manage contacts, then Restore
Contacts.
• Select the .vcf file that has just
arrived, and then select Yes.