23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Clock features
44
Alarm
The MP02’s alarm clock can be
programmed with multiple settings, and
uses the powerful hands-free loudspeaker
in combination with the vibrating alert
feature. It is unaffected by the MP02’s
Silent mode and general volume setting;
it does not function when the phone is
switched off.
Ensure that the MP02 has sufficient
battery life when setting the alarm.
⏤ Creating a new alarm setting
• From the Main menu, select Clock,
then Alarm, then New.
• Use the number keys or the Up and
Down keys to enter the desired time,
and to specify AM or PM if applicable.
Use the and Back keys to move
between the settings and then to
move through to the next step.
• Alternatively, from the Home screen,
enter the desired alarm time in
24-hour clock format (even if the
phone is set to 12-hour format) and
select Set alarm.
• Select whether the alarm is to sound
once only within the next 24 hours, or
on a regular basis as desired, by
scrolling and then pressing the key.
• A Notification will be created, stating
when the alarm is set to go off. The
alarm can be modified by clicking on
the Notification.
⏤ To select a different time zone
• From the Main menu, select Settings,
then Date and Time.
• The current time zone will be
displayed within the menu.
• To change this, select it and then
move across the map by using the Up
and Down keys.
• When the required time zone is
indicated, exit by pressing the key.
⏤ Using previously-defined alarm
settings
• From the Main menu, select Clock,
then Alarm.
• Select the desired alarm setting.
Settings that are marked with a filled
circle are set to go off, settings that
are marked with an empty circle are
inactive.
• Select an option: Turn on/off, Delete or
Edit.
If an alarm is already set, its
Notification can be used to directly
access the Alarms section of the MP02.
⏤ Silencing the alarm
• When the Alarm is sounding, press
the End key to silence it (or the Back
key to activate the snooze feature).
Alternatively, press the Down arrow
and choose Stop or Snooze.
• If the snooze feature is activated, the
alarm will sound again after ten
minutes.
It has been clearly shown that the best way
to sleep effectively is to use a dedicated alarm
clock, rather than a phone, and to not use a
snooze option. While the MP02 is much less
of a disturbance to sleep than a smartphone
is, like any phone its alarm feature should
ideally just be used as a travel alarm clock
and for situations other than waking up from
sleep.
World Clock
The MP02’s World Clock feature allows
the user to quickly find out the current
time in other parts of the world by
creating a list of designated locations.
⏤ Setting world locations
• From the Main menu, select Clock,
then World Clock, then Add location.
• Choose whether to specify a location
via a map or a list of city names. If
using the map, first use the Up and
Down keys to highlight a region and
press the key to expand it. Next,
use the Up and Down keys again to
highlight a city and finish by pressing
the key.
• The newly-selected city will appear in
the list of countries within the main
World Clock page. It is possible to
have cities that share a time zone on
the list together. (If a city cannot be
selected, this means that it is already
on the list.)
• To remove a city from the list, select it
and then select Delete. A Delete All
option is available at the top of the list.
To Next Page
Loading...
