23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Calls II
40
Voicemail
Voicemail allows callers to leave a voice
message when their call is not answered,
or when the MP02 is switched off or out
of network coverage. It is handled by the
network provider.
To turn voicemail on or off, set an
outgoing message for callers to hear,
listen to incoming messages, etc., it is
necessary to call a voicemail access phone
number that is specific to the network
provider. Contact them for more
information about how to use this
service.
The network provider’s voicemail
number can be saved in the MP02 for
instant access to voicemail services.
⏤Setting the voicemail access number
• From the Main menu, select Settings,
then Voicemail.
• Enter the network provider’s
voicemail access phone number.
⏤ Accessing voicemail
• From the Home screen, long-press
the “1” key (marked with a symbol
that represents audio tape).
• The access number will now be called.
Follow the network provider’s
automated instructions for setting up
and using their voicemail service.
• Press the End key to finish the call.
Diverting incoming calls
The network provider’s system can
usually be set to divert calls to another
number, or to their voicemail service.
Contact them for more information on
this.
The following situations can be set to
trigger a call diversion.
• When a call is not answered.
• When the MP02 is busy on another
call.
• When the MP02 is unreachable
(switched off or out of network
coverage).
• All calls.
⏤ Setting up call diversion
• From the Main menu, select Settings,
then Calls, then Divert calls.
• Select a trigger situation, as described
above.
• Enter the destination number, either
manually or from the Contacts list. If
there is already a number entered –
the network provider’s voicemail
number may have been set
automatically – use the Down key to
scroll through it to access menu
options below.
• Select Update to send the number to
the network provider. Alternatively,
press the Back key or select Cancel to
exit the procedure and leave the
network provider’s settings
unchanged.
⏤ Activating/deactivating call diversion
• Use the Down key to scroll through
the destination phone number, and
select Turn on or Turn off.
• Call diversion can be turned off
completely by selecting Cancel all
diversions.
⏤ Confirming call diversion
• To check with the network provider
that call diversion is functioning,
select Cancel all diversions, then Query
status. (No settings will be changed.)
To Next Page
Loading...
