Punkt MP02 - Timer and Stopwatch Operations

23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Clock features
45
Timer
The Timer feature is a countdown alarm;
at the end of the specified length of time
an audio signal will sound (unless the
MP02’s Master Volume has been set to
zero or Silent mode has been activated).
⏤ Setting the Timer
• From the Main menu, select Clock,
then Timer.
• Use the number keys or the Up and
Down keys to specify the length of
time before the audio signal sounds.
Use the and Back keys to move
between the individual settings.
• Press with the seconds highlighted
to begin the countdown.
• Alternatively, from the Home screen,
enter the desired countdown time
(e.g. 12345 for 1 hour, 23 minutes and
45 seconds) and select Set timer.
• The Timer feature can be exited while
still in operation by pressing the End
key (or the Back key); the countdown
will continue and a Notification will
be set, showing how much time
remains. Selecting this Notification
will reopen the Timer window.
• To stop the countdown and either set
a new time or return to the Clock
menu, select Reset or Cancel from the
Options menu.
• When the countdown has finished,
press the End key or select Dismiss or
Cancel from the Options menu.
Stopwatch
The stopwatch feature allows the user to
measure how long something lasts.
⏤ Setting the Stopwatch
• From the Main menu, select Clock,
then Stopwatch.
• Press the key to start the
Stopwatch.
• Pressing the key again will pause
and then restart the Stopwatch.
• To reset the time back to zero, first
pause the Stopwatch and then press
the Back key.
• Unlike with the Timer, pressing the
End key when the Stopwatch is
running will close it completely and
delete its reading.