65
Record and Snapshot
You can record video or still images from any of the video streams onto your tablet for later
review. This video is separate from that recorded on your DVR’s hard drive and recording on
your tablet will not affect the recording schedule on your DVR.
Only one channel can be recorded or have a still image captured at a time. As mentioned
before, this will be the channel currently indicated with a red outline around the edge.
Touching the Record icon will begin the recording. You are able to perform other operations
while recording. Touching the Record icon a second time will end the recording. The recording
will also end when it reaches the maximum file clip size or fills up the available memory - both
can be set using the Settings menu available at the top of the screen.
Touching the Snapshot icon will cause the selected channel to flash white for a second,
indicating that a still image has been captured and saved to your tablet’s memory.
Playback
Video recordings saved onto your tablet can be accessed through the Playback menu which
can be reached by selecting Playback at the top of the screen.
The Playback window allows you to search for a recording by date and time. Enter the
desired search parameters, including which channel, and then touch Search. A list of
recordings which match your preferences will be displayed on the right portion of the window.
Tap on the desired video to begin playback.
PICTURE 4-48
To Next Page
Loading...
Need help?
General
