GEM5000 Gas Analyzer
Page 31 of 102
3) Select soft-key ‘Next’ to display the next screen, ‘Previous’ to return to the previous
screen, or select soft-key ‘Exit’ to exit this screen and return to the ‘Device
Settings’ menu.
Note: For further information please contact Technical Support at (800) 968-
2026 or email landtec_support@qedenv.com
7.3.5 Navigation (optional)
This option enables the operator to switch the ‘GPS Navigation’
functionality on or off. (This is optional and dependent upon
purchasing the navigation option).
1) Select the ‘Menu’ key and the ‘Device Settings’ menu is displayed.
2) Select ‘Key 5 – Navigation On’ to switch on the GPS navigation functionality or ‘Key
5 – Navigation Off’ to switch the GPS navigation functionality off.
Note: For further information please refer to section ‘8.0 – Taking Readings’.
To Next Page
Loading...