GEM5000 Gas Analyzer
Page 68 of 102
10.6 Connecting to the Instrument
Connect the GEM5000 to your computer with either the USB cable or a Bluetooth
connection. In the event you instrument has difficulty connecting, refer to
Appendix—Configuring Communication Connections for more information setting up
and testing USB Serial communications and Bluetooth Serial communications.
The Instrument must be powered ON and in the Gas Reading screen
Launch the LSGAM software by clicking on the icon on your desktop
This is the first screen you will see when starting the program.
or
Once the software is installed on your computer with an internet connection this
instrument communications program has Auto application updates. This enables you to
always have the most current version of the instrument communications LSGAM.
If an update to LSGAM is available, you will be prompted to install the update.
To Next Page
Loading...