GEM5000 Gas Analyzer
Page 85 of 102
10.7.11 Instrument Settings
The LANDTEC System Gas Analyzer Manager software allows users to change many of the
operational settings of the instrument. To view and change the available settings click on the
Instrument Configuration tab.
In the Instrument Configuration user interface, there is an Instrument Settings option tree.
The Instrument Settings tree allows for easy navigation to the following categories:
Alarm Settings
Date/Time Settings
Misc Options (GEM-2000 only)
Units of Measurement
Calibration History Summary (GEM5000 only)
The following sections describe each option category.
To Next Page
Loading...