GEM5000 Gas Analyzer
Page 84 of 102
10.7.10 Clearing the Instrument Memory
The Clear Instrument Memory function allows various parts of the
instrument’s memory to be cleared. Upon clicking on the Clear Instrument Memory button
the following options are available.
Answer Yes to perform the action.
Answer No or Cancel to return to the clear memory dialog.
10.7.10.1 “Cold Start”
A “Cold Start” of the 5000 instrument is a way to reset the instrument and purge all non-
factory information from the instrument. A cold start will PERMANENTLY DELETE readings,
calibration events, IDs, and technician information from your instrument. Under normal
operating conditions, instruments should NOT need to be Cold Started. Due to technical
reasons, Cold Starting a GEM5000 is the only means of clearing technician information from
the instrument.
Upon clicking the button a confirmation screen will appear. Click NO to abort the
Cold Start operation, Click Yes to perform the cold start.
To Next Page
Loading...