Qualigen FastPack IP System - Page 27

65000159 Rev. 008 (06/17) 17
Calibration Procedure
Action
Instrument
Information
Illustration
Slip the FastPack
®
IP into
the external printer from
the left side with the label
side up and the label facing
towards the rear of the
external printer.
Printer will print and
release the FastPack
®
IP
automatically.
It is important to insert the
FastPack
®
IP from the left
side of the printer to avoid
tangling or twisting the
printer ribbon.
Remove the FastPack
®
IP
from the left side of the
external printer.
It is important to remove
the FastPack
®
IP from the
left side of the printer to
avoid tangling or twisting
the printer ribbon.
Find the result printed on
the FastPack
®
IP peel-off
label.
Calibrator Pass/Fail
Calibration Lot #
Date of Test
Instrument Serial#
All the necessary
information for Quality
Control is now included on
the peel off label.
Peel off the label.
FastPack
®
IP
Lot Number
Expiration
Date
Cal Pass
or Fail
Calibrator
Lot #
Date
Operator
Initials
Instrument
Serial #