Puma 20/408 | Safety
Seat adjustment factory settings
Sunrise Medical HCM will deliver a Puma wheelchair with default factory settings. These settings depend on the options ticked on
the order form. When a conguration is ordered that causes interference, Sunrise Medical HCM applies modied factory settings
and informs the customer of this via a note included in the wheelchair delivery. The seat tilt conguration tables also provide
detailed information about factory settings.
Moving parts
• A wheelchair has moving and rotating parts. Contact with moving parts may result in serious
physical injury or damage to the wheelchair. Contact with the moving parts of the wheelchair
should be avoided.
• Wheels (turning and castor)
• Electric tilt in space adjustment
• Electric high/low option
• Electric backrest adjustment
• Electric elavating legrests
Electromagnetic radiation
The standard version of your electric wheelchair has been tested on the applicable requirements
with respect to electromagnetic radiation (EMC requirements) In spite of these tests:
• it cannot be excluded that electromagnetic radiation may have an inuence on the wheelchair. For example:
• mobile telephony
• large-scale medical apparatus
• other sources of electromagnetic radiation
• it cannot be excluded that the wheelchair may interfere with electromagnetic elds.
For example:
• shop doors
• burglar alarm systems in shops
• garage door openers
In the unlikely event that such problems do occur, we request that you notify your supplier immediately.
In congurations tted with an Intelligent Seating Module (ISM) and R-net controller, it is possible that extreme electrical
discharge situations (due to static electricity) may cause a fault message (‘ISM over-current’) ashing on the screen. If this occurs
the wheelchair can be turned off for a few seconds and back on again to clear the fault.
Decals and instructions on the wheelchair
Decals and instructions on the wheelchair
• The signs, symbols and instructions afxed to the wheelchair comprise part of the safety facilities. They must never be covered
or removed. They must remain present and clearly legible throughout the entire lifespan of the wheelchair.
• Replace or repair all illegible or damaged signs, symbols and instructions immediately. Please contact your supplier for
assistance.
To Next Page
Loading...
Need help?
General
