Section III - Airlogic Graphic Controller
Text on figures
(i) Service plan
(ii) Level
(iii) Running hours
(iv) Real time hours
(v) Modify
Modifying a service plan
Dependant on the operating conditions, it can be necessary to modify the service
intervals. (By default the service plan in Electronikon controller is for normal application
and needs to be changed when running in medium or harsh applications). To do so,
use the Scroll keys to select the value to be modified. A screen similar to the one below
appears:
Press the Enter key. Following screen appears:
Quincy Vacuum Pump-QSV Series 39
To Next Page
Loading...
Need help?
General
