Section IV - Installation
WARNING!
It is not allowed to lift the Vacuum pump if the canopy parts or lifting supports
are not completely installed. When the vacuum pump is being lifted, it is also
forbidden to come under the load or to perform maintenance activities to it.
Acclimatization
NOTICE!
When moving the vacuum pump into an installation room, condensation can occur
on some components.
To avoid the dew from harming the electrical components, ensure at least 2 hours
of acclimatization before switching on the vacuum pump.
Electrical connections
WARNING!
Working with machinery controlled by a frequency converter requires special
safety precautions. These safety precautions depend on the kind of network used
(TN, TT, IT system). Consult Quincy.
NOTICE!
Most vacuum pump are designed for use in TT/TN networks and are intended for
industrial environments where the electrical supply is separated from the residential/
commercial supply network.
To use the machine in light industrial, commercial or residential environments with a
shared supply network or in an IT network, extra measures can be required: contact
Quincy.
Quincy Vacuum Pump-QSV Series 67
To Next Page
Loading...
Need help?
General
