Real-time Display Mode
The Real-time Display Mode, as the name describes, provides the user the ability to view real-time dash
data, such as MPH and lap times. The Display Dash automatically enters the Real-time Display Mode,
anytime one of the following true:
1) Engine speed is above 300 RPM.
2) Vehicle speed is currently above 5 MPH.
3) Vehicle speed has been above 25 MPH with in the past 30 seconds.
4) Lap number and time will display for 3 seconds each time the start / finish line is crossed.
When any one of the above conditions is met, the dash will begin to display real-time data. The default
displays upon entering Real-time mode for the first time after power up is the current lap number on the
left display and last lap time on the right display. To change the real-time data on the left display enter a
short press on the left key. To change the real-time data on the right display, enter a short press on the
right key.
SHORT PRESS TO LEFT OR RIGHT PROGRAMMING BUTTON PRODUCES:
Left Dash Display Inputs Ri
ht Dash Displa
Inputs
Engine RPM MPH
Current Lap Number Current Lap Time
MPH ( DSP 1) Battery Volt (DSP 3)
Lateral G (DSP 2) Lap Time Difference from Best Lap
Tip: The channel displayed for DSP 1-3 can be customized. For instance, you can
program DSP 1 to display Lap Time and DSP 3 to display Engine RPM. See Page 21 for
instructions.
32
To Next Page
Loading...