1
st
Edition 1-6
Handling
"CAUTION
Handle PowerPact6 processors using the board edges or front panel.
Incorrect handling may cause component damage
Heatsink
"CAUTION
Do not remove the heatsink.
There are no PROMs or other user-alterable components
underneath the heatsink, so users should have no reason to
remove it.
Users should not attempt reattachment of the heatsink, as this
requires precise torque on the screws attaching the heatsink
to the PCB. Over-tightening the screws may cause the
heatsink to damage components beneath it (e.g. the main
PowerPC processor). Removal and re-attachment of the
heatsink should only be carried out by Radstone.
To Next Page
Loading...