1
st
Edition 2-1
2. Unpacking and Inspection
Unpacking
• When you receive the shipping container, inspect it for any evidence of physical damage
• If you see any damage, refer to the Terms and Conditions of Sale (provided with your delivery)
for further instructions. If you need to return the product, please contact your local Radstone Sales
Office or Agent
PowerPact6 processors are sealed into an antistatic bag and housed in a padded cardboard box. Retain
this packaging and use it whenever the board is stored or shipped. Failure to use the correct packaging
may invalidate the warranty.
Box contents checklist:
1) PowerPact6 Single Board Computer in antistatic packaging.
2) Manual CD-ROM (colour may vary).
3) Embedded Software License Agreement (RT5087).
4) Where to find the latest product manuals leaflet (only included
with the very latest hardware products).
$ Note: Configuration links (jumpers) may be separately packaged inside
the box.
Identifying Your Board
PowerPact6 processors are identified by labels at strategic positions. You can cross-check these against
the Advice Note provided with your delivery.
Identification labels, similar to
this, attached to the shipping box
and the antistatic bag provide
identical information:
PowerPact6 product code,
product description, equipment
number and board revision.
On the board within the antistatic bag, there is an identifying label
similar to this attached to the printed wiring board.
On conduction-cooled versions of the board (build levels 4 and
5), there is also a label similar to this attached to the front panel.
A label, similar to this, giving the board’s hardware Ethernet or MAC address is also attached
to the printed wiring board.
00-80-8E
00-50-93
To Next Page
Loading...