Notice : 1. Once the USB disk is detected by the system, you need to set the read authority before reading the
“usb1” folder.
2. To remove the USB disk, click “Uninstall” before removal.
3.5.5.2 RAID Setting
SL3610/3620-2S-LB2 supports two disk array level applications: RAID 0 RAID 1, and Linear. If
only one hard disk is inserted, the “disk array” window will display “unable to set the disk array”;
if two hard disks are inserted, the “disk array” window will display three options: “RAID0, RAID1
and Linear”.
(SL3610 only support RAID 0 & RAID 1)
After selecting the RIAD mode and le format, click “Create Disk” to set the disk array.
Notice : If you would like to replace the hard drive under RAID 1 mode, please nd and click the “Exchange DISK”
button from “RAID Setting” in the GUI. The system will shut off to let you change the hard drive.
3.5.5.3 Firmware Upgrade
Click rmware upgrade to display the present rmware version. You can download the latest
rmware version onto your PC and designate the correct le path in “Updated File” to upgrade
the rmware. When you are upgrading the rmware, all network services will stop.
To Next Page
Loading...
