Basic Programming
ENG
ESP-Me Controller
20
Basic Programming
1. Set Date and Time
Turn the dial to SET DATE
A
Press or to select the setting to change.
B
Press or to change the setting value.
C
Press and hold or to accelerate adjustments.
Turn the dial to SET TIME.
A
Press or to select the setting to change.
B
Press or to change the setting value.
C
Press and hold or to accelerate adjustments.
To change the time format (12 hour or 24 hour):
A
With MINUTES blinking, press .
B
Press or to select the desired time format,
then press to return to the time setting.
2. Set Watering Start Times
Up to six Start Times are available for each program.
Turn the dial to SET WATERING START TIMES
A
Press PROGRAM SELECT to choose the desired
Program (if necessary).
B
Press or to select an available Start Time.
C
Press or to set the selected Start Time
(ensure the AM/PM setting is correct).
D
Press to set additional Start Times.
NOTE: The OFF Position for any start time is
between 11:45 PM and 12:00 AM.
To Next Page
Loading...
Need help?
General
