60
ADVANCED FEATURES
Your Notes:
Memories (Continued)
Deleting Entire Sequences
1. Press
2. Enter Sequence Number. Example: Sequence 2
3. Press to enter Delete mode.
4. Press to select ‘yes’.
Default Sequence and Register
Sequence 99 Register 99 is reserved for power-up settings. This replaces the default start-up
setting when the unit is powered on. If a new power-up setting is desired, set the Generate
and Receive screens as required and save your new power-up default as normal using SEQ 99
REG 99.
This can be overwritten at any time, or deleted it to return to the COM3010’s original
default power-up state.
Property of Ramsey Electronics, Inc.
Do not reproduce or distribute.
To Next Page
Loading...
