90
DETAILED INFORMATION
6.50.05 GET Commands
Major
Comma
nd
Sub-command Low High Returns Description
Bottom Meters
GET RFCOUNT 0 1200.000000M
Hz
####.#####
#MHz
Get current RF frequency
count specified by the
current counter mode
(see counter mode lists)
GET AFCOUNT 0 6000 ####.#kHz
Get current AF count, only
if AF counter is selected
as one of the meters
GET FMDEV 0 +/-7kHz +#.##kHz/-
#.##kHz
Get current FM deviation
(numerically)
GET DELTAF +/-
####.#####
#MHz
Get frequency error from
current receive frequency
(see counter mode lists)
GET DBSINAD,SINA
D,SIN
0dB 40dB ##.#dB
Get dB SINAD (see valid
meter mode lists)
GET AM% 0 100% ###%
Get AM percent reading if
in AM receive mode and
proper meter is selected.
Top Meters
GET POWER 0 100W ###W
Get Measured power
GET BAT 10V 16V ##.#V
Get Battery Voltage
GET RSSI -100dBm -30dBm ##dBm
Get receiver RSSI
GET SQUELCH O (OPEN) C (CLOSED) O/C
Get squelch state
Property of Ramsey Electronics, Inc.
Do not reproduce or distribute.
To Next Page
Loading...
Need help?
General
