R&S 4200 Series - Page 63

Configuring with the R&S ZS 4200 R&S XU 4200
3.11 6166.5368.02.01
Parameters Value range Default value Properties
ACL (Access Control List)
(radio in IPv6 mode)
IPv6
20 Entries
Empty C
BSS Enable Disabled/Enabled Disabled C
Main/Standby Type Main (0)/Standby (1) Main (0) C
Line Interface in Local Mode Disabled/Enabled Enabled C
Local Mode Disabled/Enabled Enabled C
Local Mode Timeout 60 to 900 s,
0 (disabled)
0 s
(disabled)
C
EXT VSWR Limit 0 to 5 V 2 V C
EXT VSWR Polarity 0 (neg. slope) / 1 (pos. slope) 1 (pos. slope) C
Single Channel Disabled/Enabled Disabled C
Motor Tuned Telsa Filter Disabled/Enabled Disabled C
Mute Loudspeaker Disabled/Enabled Disabled C
Frequency Blocking Ranges 8 Blocking Ranges
Start-, Stop frequency
Empty C
External Power Amplifier Disabled/Jotron Disabled C
PTT Signaling Disabled/Enabled Disabled C
PTT Signaling Frequency 2040 / 2300 / 2970 / 3100 Hz 2040 Hz C
PTT Signaling Threshold –40 to 0 dB –12 dB A/C
SQ/RSSI Signaling Off, SQ, RSSI, INVSQ Off C
SQ Signaling Frequency 1225 / 2040 / 2175 / 2440 /
2970 / 3300 Hz
2440 Hz C
SQ/RSSI Signaling Level –40 to 0 dB –12 dB A/C
RSSI Output R&S Standard,
User defined
R&S Standard C
R&S
Standard
User
defined
RSSI Output Curve Slope –500 to 500 mV/dB 38.5 mV/dB 18 mV/dB A/C
RSSI Output Curve Offset –50 to 50 V 0.00 V 1.24 V A/C
RSSI Output Curve Min.
Voltage
0 to 5 V 0.00 V 1.52 V A/C
RSSI Output Curve Max.
Voltage
0 to 5 V 5.00 V 3.00 V A/C
TX Preemphasis 0 to 15 dB 0 dB A/C
SNMP Community String Max. 15 characters public C
SNMP Enable Disabled/Enabled Disabled C
E1 Alarm for Inactive
Warning
Disabled/Enabled Disabled C
DC-Battery Supervision Disabled/Warning/NOGO Disabled C