4 | Working with the unit
Original instructions for use 13 / 96
4 Working with the unit
4.1 Initial start-up
When you start your unit for the first time, it will have already been properly installed by a RATIONAL Service
Partner, so it will be ready to use. Information related to installation is available in the installation manual included
in delivery.
Before working with the unit for the first time
1. Clean the unit and all accessories before initial use.
More information is available here: Care [}80]
4.2 Switching the unit on and off
1. To switch the unit on, press and hold this button until the LED lights up green:
> The unit will power on. The home screen [}14] will appear.
2. To switch the unit on, press and hold this button until the LED lights up green:
> A prompt will appear, asking if you really want to switch the unit off.
3. Press this button: Yes
>> The unit will power off.
To Next Page
Loading...
Need help?
General
