4 | Working with the unit
20 / 96 Original instructions for use
n
Deep-frying is in progress, or has recently finished and the pan has not yet been tilted fully.
n
The pan is too hot.
1. To open the pan valve, press and hold this button:
> The pan valve will open.
2. To close the pan valve, press and hold this button:
> The pan valve will close.
> This button will be displayed:
When the pan valve is open, selecting a manual operating mode or an intelligent cooking path will cause it to shut
again automatically.
Units with pressure cooking (optional)
The pan valve cannot be opened in the following circumstances:
n
Deep-frying is in progress, or has recently finished and the pan has not yet been tilted fully.
n
The pan is too hot.
1. To open the pan valve, press and hold this button:
> The pan valve will open.
2. To close the pan valve, press and hold this button:
> The pan valve will close.
> This button will be displayed:
When the pan valve is open, selecting a manual operating mode or an intelligent cooking path will cause it to shut
again automatically.
4.11 Inserting core temperature probes
CAUTION
Hot core temperature probe
Touching the hot core temperature probe without protective gloves could result in burns.
1. Always wear gloves when working with hot core temperature probes.
CAUTION
Sharp core temperature probe
If you are not careful with the core temperature probe, you could injure yourself on the sharp tip.
1. Always wear gloves when working with hot core temperature probes.
2. After using the core temperature probe, return it to its position on the pan lid.
NOTE
Core temperature probe hanging out of the pan
Failing to return the core temperature probe to the magnetic holder on the pan lid after use could result in
damage to the core temperature probe.
1. After using the core temperature probe, return it to the magnetic holder.
To Next Page
Loading...
Need help?
General
