11 | Settings
Original instructions for use 65 / 96
> A calender is shown.
2. Select the desired date.
>> The date is applied automatically.
Time of day
1. Press this button:
Time
> The time is shown.
2. Press the time.
3. Set the desired time.
>> The time is applied automatically.
Switch 24h/12h
1. Select 12 to set the 12-hour format and 24 to set the 24-hour format.
ConnectedCooking
You can also have the time synchronized automatically through ConnectedCooking.
1. Press this button:
2. Press this button: ConnectedCooking
3. Next to automatic time synchronization, press this button:ON
11.2.3 Temperature format
Use this to choose whether to display temperatures in °C or °F.
11.2.4 Volume units
Use this setting to indicate whether you would like volume displayed in liters L or gallons G.
11.2.5 Program view
Here, you can set whether intelligent cooking paths in the iCookingSuite and in the programming mode should be
displayed in a single-column, dual-column or triple-column format.
1. Press this button: Program view
2. Select
Single-column, Dual-column or Triple-column.
>> The selection is adopted automatically.
To Next Page
Loading...
Need help?
General
