4 | Working with the unit
22 / 96 Original instructions for use
Soups, sauces, and desserts
1. Place the core temperature probe into the pan so that the core temperature probe is completely immersed in
the liquid.
2. When stirring the liquid, make sure to keep the core temperature probe in the pan.
3. When closing the pan lid, make sure that the core temperature probe is fully immersed in the liquid.
Products of different sizes
1. Start by inserting the core temperature probe into the smallest piece.
2. Once that piece has reached the desired core temperature, remove the small pieces from the core temperature
probe, and take them out of the pan.
3. After that, insert the probe into a larger piece and use the Reinsert
option to continue the cooking path.
Core temperature probe not detected
a The display will show this symbol:
1. Place the core temperature probe as described in these instructions for use.
2. Confirm the correction.
>> The cooking path will be implemented correctly. If you do not confirm the correction, the cooking path will be
canceled and you will need to restart it. A few cooking paths, such as low-temperature cooking, will continue
running despite the error.
4.12 Using the hand shower
The hand shower has two spray modes: spray
(A) and jet (B).
WARNING
Water evaporates explosively when poured into hot grease or oil.
Using water to extinguish smoking grease or oil could cause an explosion.
1. Never pour water into hot oil or grease.
2. If a fire breaks out, close the pan lid in order to cut off the fire’s oxygen supply. Switch the unit off. If the fire
has spread, use a fire extinguisher that is suitable for grease fires. Never use water or foam extinguishing
agents on grease fires.
To Next Page
Loading...
Need help?
General
