Cleaning
• Before the start of CleanJet
®
cleaning the
hinging racks or mobile plate rack must be
inserted in the cooking cabinet as instructed.
• Leave the appliance door slightly open if it is
going to be idle for a prolonged period (e.g.
overnight).
• Do not clean unit with high pressure cleaner.
• Do not treat unit with acids or expose to acid
fumes – this will damage the protective layer of
stainless steel and units might discolour.
• Follow the instructions on the cleaner pack.
• For cleaning sequences see "CleanJet
®
" or
"Manual Cleaning " chapters.
• Only use cleaning agents made by the appliance
manufacturer.
Warning!
• Wear the correct protective clothing,
gloves, goggles and mask.
Descaling
• Note that the steam generator must be descaled
as required (see Descaling chapter).
Warning!
• Wear the correct protective clothing,
gloves, goggles and mask.
Maintenance
• Inspection, maintenance and repair work must
only be carried out by trained technicians.
• The unit must be switched off at the mains when
cleaning (except CleanJet
®
cleaning), carrying out
inspection, maintenance or repair work.
• If the appliance is installed on casters, freedom
of movement must be restricted so that energy,
water and drainage pipes cannot be damaged
when the unit is moved. If the unit is moved,
make sure that energy, water and drainage pipes
are correctly disconnected. If the unit is returned
to its original position, make sure that the
retention device, energy, water and drainage
pipes are correctly fitted.
Servicing
• Your appliance should be serviced by an
authorised service partner at least once a year to
ensure that it remains in perfect working order.
Warning!
• Switch the appliance off at the mains
before opening service doors or working
on live components.
- 10 -
General Instructions / For Your Safety
To Next Page
Loading...
