Low water
This may appear on the display when you switch
on. It means that the steam generator is not yet
filled with water. When it is full the display goes out
automatically.
If the display does not go out, check that the water
valve is open and the strainer at the water supply
(solenoid valve) is unblocked.
Ambient temperatures
If ambient temperatures drop below +5 °C make
sure the cooking cabinet is heated to room
temperature (> + 5 °C) before starting to use it.
Core temperature probe
• The core temperature probe and core
temperature probe positioning aid may be hot –
use oven gloves.
• Cool core temperature probe with hand shower
before use.
• Do not let core temperature probe hang out of
cooking cabinet.
• Remove core temperature probe from food before
removing a load.
Cool down
Use the "Cool Down" function to cool the cooking
cabinet .
Warning!
• During "Cool Down" the fan wheel runs
when the door is open!
• Do not switch on "Cool Down" function
unless air baffle is correctly locked.
• Do not touch the fan wheel.
• Appliance must not be cooled with cold
water.
Hand shower
Pull hand shower out to use.
Press hand shower control button to select 2 jet
strengths.
Hand shower retracts automatically.
Make sure hand shower hose is fully rewound
after use.
Do not pull hand shower out beyond the end mark.
Warning!
• Hand shower and hand shower water may
be hot!
- 9 -
General Instructions / For Your Safety
To Next Page
Loading...
