17
8. DISTANCE & VOLUME DISPLAYS
1) To display the total distance traveled while applying material depress
. To clear this value the key must be turned to the horizontal position
and then enter "0".
2) To display the total volume of material applied depress
. To clear this
value the key must be turned to the horizontial position and then enter "0".
3) To display the distance traveled while applying material during day, event, etc.
depress
. To clear this value enter "0".
4) To display the distance traveled while applying material during day, event, etc.
depress
. To clear this value enter "0".
5) To display distance (feet)[meters] traveled depress
.
9. VOL/MIN & LOW LIMIT FLOW ALARM
Displays volume/minute, low limit alarm, and tier functions. Depress .
To advance through the categories depress
.
DISPLAY SCREENS
LIQ DATA DESCRIPTION
0000 FLAn .0 Actual volume/minute of system.
0000 LLAn .0 Low Limit Flow Alarm value. Volume/minute
in which alarm is turned on.
0000 tir2 .0 Tier 2 Enable Value. Volume/minute value
in which tier 2 valve will open.
0000 tir3 .0 Tier 3 Enable Value. Volume/minute value
in which tier 3 valve will open.
0000 bAnd 10 Tier Disable Percentage.
To Next Page
Loading...
