24
MISCELLANEOUS SCREENS
DISPLAY SMOOTHING
a) LIQ display will show "MiSC". Left DATA display will show "diSP". Right
DATA display will show "on".
b) Depressing
steps the right DATA display between "on" and "oFF". A
setting of "on" means smoothing is enabled; a setting of "oFF" means
smoothing is disabled, therefore the actual liquid rates will be displayed
at all times. The percent smoothing is determined by the third digit of
the VALVE CAL value.
c) Depress
to advance to MANUAL CONTROL.
MANUAL CONTROL
a) LIQ display will show "MiSC". Left DATA display will show "MAn". Right
DATA display will show "oFF".
b) Depressing
steps the right DATA display between "on" and "oFF".
A setting of "on" enables manual control when the key switch is in the
vertical position, a setting of "oFF" disables manual control when key
switch is in the vertical position.
c) Depress
to advance to LOW TANK LEVEL SHUT-OFF.
LOW TANK LEVEL SHUT-OFF
a) LIQ display will show "MiSC". Left DATA display will show "LeuL". Right
DATA display will show "oFF".
b) Depressing
steps the right DATA display between "on" and "oFF".
A setting of "on" enables the console to automatically close the lane valves
when the tank volume reaches the low tank alarm. Values must be entered
for VOL/TANK and LOW TANK ALARM for this feature to function properly. A
setting of "oFF" disables this feature.
c) Depress
to advance to ZERO SPEED SHUT-OFF.
ZERO SPEED SHUT-OFF
a) LIQ display will show "MiSC". Left DATA display will show "AUto". Right
DATA display will show "oFF".
b) Depressing
steps the right DATA display between "on" and "oFF".
A setting of "on" enables the console to automatically close the lane valves
To Next Page
Loading...
