Raven DCS 410 - Remote Switch Option

35
APPENDIX 8
REMOTE SWITCH OPTIONS
FIGURE 8
REMOTE MASTERREMOTE MASTER
REMOTE MASTERREMOTE MASTER
REMOTE MASTER
The REMOTE MASTER supplies power to the MASTER switch. Therefore switching the REMOTE
MASTER ON when the MASTER switch is in the ON position will energize the liquid
applicator. The REMOTE MASTER only switches on the applicator.
INSTALLATIONINSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
To install a REMOTE MASTER, locate the solid orange wire within the console cable. Cut
the orange wire and use both ends to install the REMOTE MASTER as shown in Figure 8.