CHAPTER 3
36 CAN Sidekick Pro Injection for Case IH 3/4XXX Installation and Operation Manual
FIGURE 47. Dual Pump Fitting Assembly Installed
3. Assemble the rinse tee for dual pump station as shown below. Use pipe thread sealant on the threaded joints.
FIGURE 48. Assembling Dual Pump Station Rinse Tee Fittings (Dual Pump Station System Only)
SINGLE PUMP STATION PLUMBING INSTALLATION
1. Assemble the single pump fittings as shown in the image below. Seal all the threaded joints with pipe thread
sealant.
3/4” Rinse Hose Connection
1” Chemical Hose
Connections from Fill
3/4” Hose
Barb to 1/
2”NPT
1/2” NPT Tee
1/2” NPT to 3/4”
Hose Barb
Elbow
To Next Page
Loading...
