Installation: Installation 45
INSTALLATION
HOSE ROUTING
TANK HOSES
1. Connect one end of the supplied 1” braided hose to the hose barb fitting on the tank drain valve plumbing at
the bottom of the tank.
FIGURE 65. Tank Hose Routing
2. Secure the hose to the hose barb elbow fitting using two of the provided hose clamps.
3. Route the hose beneath the tanks through the open inner portion of the upper tank support bracket and
towards the fill station.
4. Route the hose beneath the catwalk, along the machine frame, and to the fill station.
FIGURE 66. Tank 1 Hose Routing to Fill Station
Route Tank Drain
Hose Through
Tank Support
Brackets, Under
Catwalk, and
Along machine
Frame to Fill
Station
Tank 1
Tank 1 Fill Station 1
(Rear)
Route Hose Along
Frame (protect using
rubber hose guards)
To Next Page
Loading...
