nVent.com/RAYCHEM
|
55RAYCHEM-OM-EU2032-NGCUIT3EX-EN-2203
RS- Host
Fig. 3.43 System | Comm window (RS-485 Host Configuration)
Fig. 3.44 System | Comm window (RS-232 Host Configuration)
This sets the time the NGC-UIT3 waits after last character is received before it determines that the message has ended.
Range: 0–1000 milliseconds
Default: 25
This sets the time the NGC-UIT3 will wait after it receives a message before it replies.
Range: 0-5000 milliseconds
Default: 0
Allows you to select the baud rate of the external communication port.
Selection: 2400, 4800, 9600, 19200, 38400, 57600
Default: 9600
To Next Page
Loading...
Need help?
General
