Chapter 4: Using the Chart 87
How can I use tracks?
Tracks can be used to:
• Review where you have been.
• Retrace your original journey by converting the track to a route and automatically
reversing it.
If required, a track can be personalized and the track options customized to your own
particular needs. You can:
• Rename a track.
• Change the color of a track.
• Specify the time period between track point creation (see
page 98
).
• Specify the distance between each track point (see
page 98
).
Creating a track
To start a track...
[
If the power fails whilst a track is being recorded or the position fix is lost, a break will
occur in the track. Only the last segment of a track can be converted into a route.
If the maximum number of tracking points is reached, you will be warned. The track
will continue to be recorded with the earlier tracking points being overwritten.
To stop the track...
Stop the tracking process:
D6500-2
TRACKS… START TRACK
Track laid from your boat
D6501-3
TRACKS… STOP TRACK DISCARD TRACK
SAVE TRACK
CANCEL STOP
COMMAND
Or:
Or:
To Next Page
Loading...
