Raymarine E120W - Using the 3 D Chart with a Fishfinder; Navigating with 3 D Charts

114 E-Series Networked Display Reference Manual
5.13 Using the 3D chart with a fishfinder
If you have a fishfinder in your system, you can display the transducer cone to indicate
the area that it covers on the 3D chart. This is particularly useful when fishing as it
enables you to compare the chart view with the information your fishfinder is showing you.
To display the transducer cone:
5.14 Navigating with 3D charts
You can access navigation options when a 3D chart is active. This includes following a
route and selecting a waypoint from the waypoint list to start a GOTO.
D8259_2
50 kHz
200 kHz
D8237_1
TRANS CONE
PRESENTATION…
O
N
D8258_2
Active
waypoint
Course
of route
Waypoint
arrival
circle