192 E-Series Networked Display Reference Manual
Pre-requisites for using the weather application
For your E-Series to display weather data, your system must be connected to a
Raymarine SR100 Sirius weather receiver which is supplying the appropriate data. For
your vessel to be displayed and for weather reports to be available at your position,
you will need a fix for your boat’s position and be within US coastal waters.
Note:
For further information on installing and commissioning a weather receiver, please refer
to the Weather Receiver Installation Guide.
Adding a weather application
A weather application does not appear in the pre-configured page sets. You will
therefore need to customize a page set to include a weather application window.
Please refer to
page 257
for details.
Specifying the weather elements
You can view textual reports or animated graphics and specify the weather elements
that you require:
1. Open a weather application window.
2. Display the weather graphics menu:
3. Select the weather elements for display:
D8614-1
Storm Cast OFF
Sea Surface Temp OFF
Canadian Radar OFF
Storm Tracks OFF
Lightning OFF
Surface Ob Stations OFF
Cities OFF
Wind OFF
Waves OFF
Surface Pressure OFF
Weather Graphics
N
DISPLAY
GRAPHICS...
D8563-1
OK
OK
Highlight required option
Enter option
Toggle ON or OFF as required
Repeat until all options set as required
To Next Page
Loading...
