Raymarine E120W Reference Manual

Chapter 2: General Operation 25
Sending and receiving information using a PC
You can transfer and retrieve waypoints or routes to and from another instrument or
PC using NMEA or SeaTalk
hs
.
With a RayTech 6.0’s planner you can transfer waypoints and routes via a CF memory
card. Such transfers require that the PC be connected to the display’s NMEA port via a
serial data cable. RayTech 6.0 will transfer waypoints and routes via SeaTalk
hs
.
To transfer or receive information:
1. Select the transfer on NMEA option:
2. Press the appropriate soft key to send or receive NMEA:
Note: If you wish to stop the transfer at any point, press STOP TRANSFER.
3. When transfer is complete, STOP TRANSFER greys out and the soft keys reappear.
Password protecting your waypoints
If required, you can prevent access to, modification and sight of your waypoint and
route databases and functions by means of a password.
Password confirmation
When Password Protection is enabled and you are attempting to access a password
protected function for the first time during a power-cycle, the system will request
confirmation of your password before you can:
• Access WPTS key functions. This does not affect the operation of the MOB function.
• Access ROUTES soft key functions.
• Create a route from a track. All other track functions are unaffected.
• Archive or transfer any waypoints.
• Enter the Waypoint Password Setup menu.
Note:
Once you have provided a password to the system, it must be entered to access
the Password Setup sub-menu, regardless of the whether Password Protection is set to
ON or OFF.
Disabled data/functions
When Password Protection is ON and you have not entered a password you will be
unable to:
DATA
ARCHIVE AND
TRANSFER
TRANSFER ON
NMEA...
D8638_1
SEND WPTS ON
NMEA
SEND RTES ON
NMEA
RECEIVE ON NMEA
D6808-2
STOP TRANSFER

Raymarine E120W Specifications

General

Brand	Raymarine
Model	E120W
Category	GPS
Language	English