Chapter 5: 3D Chart 109
Multiple views
You can display multiple 3D chart views by creating a page that shows 3D cartography
in up to 4 windows. As each window is a separate application, they can be set up to
operate in active motion mode or planning mode or a combination of the two.
These can be views of:
• The same area of the chart from different angles.
• Views of up to 4 different areas of the chart.
Note:
For full details of page set up and “active” windows refer to page 17.
Vessel offset
You can specify whether the boat is fixed in the centre of the window (0 offset) or offset
by 1/3 or 2/3 of the screen. If you change the offset to 1/3 or 2/3, the view ahead of your
boat will be increased.
D8252_1
Multiple 3D views
Example:
Four 3D application windows showing the same area of the chart but from 4 different angles.
D8239_1
3D VIEW
OPTIONS...
PRESENTATION…
VESSEL OFFSET
0 1/3 2/3
To Next Page
Loading...
