Chapter 2: General Operation 29
Any such changes that you make to the nominated master will be saved when you
power off.
Functions only affecting the display in use
The majority of functions, settings, additions and changes that you perform on a single
Display are ‘seen’ by all other Displays connected to your network. There are however
some local settings that will only affect the individual display on which you are
working.
These local settings are summarized as follows:
• Page set - selecting a set, name and applications configuration.
• Power on/off key (including Day/night setting).
•The ACTIVE window.
• The displayed panel in the digital data or engine monitoring application.
• Radar and Fishfinder presentation settings.
• Radar VRMs, EBLs and Wakes.
• Chart presentation settings when the Chart View is set to LOCAL.
• Show/hide waypoints, routes or tracks.
• Fishfinder Setup Menu options (top half of menu only).
• Video, Databar and Display Setup Menus.
• Databar on/off and configuration.
•Ruler settings.
Postion Mode
TD Setup
Simulator
Bearing Mode
MOB Data Type
Variation Source
Manual Variation
Langauge
Extended Charactor set
Ground Trip Reset.....
Settings Reset......
Settings and Data Reset.....
Date/Time Setup......
To Next Page
Loading...
