Chapter 4: Using the Chart 89
...from a saved track
You can create a route from a track that you have already saved:
Note:
Alternately you can select the track via the track list - see page 88.
4.16 Editing tracks
Once you have created a track, it can be edited in a variety of ways. You can:
• Change the name of a track (see
page 90
).
• Change the color of a track (see
page 90
).
• Erase a track (see
page 90
).
Selecting a track for editing
For a track to be edited it must first be selected either via the track list or by selecting
the appropriate track on-screen.
D8368_1
CREATE ROUTE
FROM TRACK…
YES
NO
Route generation completed.
Maximum deviation from
oritinal track equals 0,001nm.
Please check route before
navigating. Do you want to name
the route?
Route generated and
dialog box displayed
To name the route
To accept default
(numbered)
Track 2
Or:
TRACK
Position cursor
over track
TRACKS ...
REVIEW AND
EDIT TRACKS ...
Highlight required track
D8674_1
Track 2
TRACK
Position cursor
over track
... via the track list
... via the cursor
To Next Page
Loading...
Need help?
General