Chapter 9: Video 183
Running the video cycle
With a video application active:
Note:
You will not be able to change the aspect ratio, contrast, brightness or color lev-
els of any video image when the video cycle is running.
Stopping the video cycle
You can stop the video cycle at any time by either pressing any of the 4 video soft keys
or by toggling the CYCLE VIDEO option to OFF.
Adjusting the image
Correcting a distorted image
The video application should automatically detect the appropriate aspect ratio for
each input source. If an image appears distorted (squashed or stretched) you should
override this automatic setting and select the appropriate aspect ratio manually; 4:3
(standard format) or 16:9 (wide screen) to rectify the distortion.
Note:
You will not be able to change the aspect ratio of any video image when the vid-
eo cycle is running.
Adjusting the contrast, brightness or color
If necessary you can adjust the level of contrast, brightness or color:
Note:
You will not be able to change these settings for any video image when the vid-
eo cycle is running.
D7490-3
PRESENTATION
CYCLE VIDEO
ON OFF
D7491-2
PRESENTATION
ASPECT RATIO
AUTO 4:3 16:9
D7492_3
PRESENTATION
CONTRAST
COLOUR
BRIGHTNESS
To Next Page
Loading...
