Chapter 3: Working with Waypoints 41
Erasing all waypoints
If you need to erase all your waypoints, you can use the ARCHIVE & TRANSFER soft
keys:
1. Select the ERASE FROM SYSTEM option and the appropriate list:
2. Erase all waypoints:
Changing the default symbol or group
When you add a waypoint to your system it is assigned to the default group and given
the default symbol:
If these are not suitable, you can select an alternative symbol and group to be the
default. For an alternative group to be selected for the default, it must first be created -
see
page 43
.
1. Select either the default symbol or group:
2. Change the symbol or group default:
D8716-1
ARCHIVE AND
TRANSFER
ERASE FROM
SYSTEM...
SELECT LIST
DATA
To Next Page
Loading...
