Raymarine E120W - Page 242

226 E-Series Networked Display Reference Manual
Adding data
Once you have selected the configure option (see above), you can add new data:
When the data bar is positioned to the side of your screen, a new selection is added at
the top of the bar. When the data bar is positioned across the top of your screen, a new
selection is added on the left. Existing data moves down as new data is added.
Moving data
Once you have selected the configure option (see above), you can move data within
the bar.
Removing data
Once you have selected the configure option (see above), you can remove data within
the bar.
D8278_1
OK
Data Groups
VESSEL
NAVIGATION
DEPTH
WIND
TIME AND DATE
CURSOR POSITION
TRANSDUCER STATUS
ENVIR
O
NMENT
Add
selected
data
ADD DATA...
Data
Highlight required
Data Group
Select Data Group
Highlight required
Data
Select Data
Pressure
Air Temp
Sea Temp
Det Drift
D8279_1
OK
Save move
Highlight
data for moving
MOVE DATA...
Sea Temp
57.9
o
F
Air Temp
85.9
o
F
Speed
216.7kt
Sea Temp
57.9
o
F
Air Temp
85.9
o
F
Speed
216.7kt
Move data
D8280_1
OK
Save move
Highlight
data for moving
REMOVE DATA...
Sea Temp
57.9
o
F
Air Temp
85.9
o
F
Speed
216.7kt
Sea Temp
57.9
o
F
Speed
216.7kt
Boxes shuffle up
to fill space