Raymarine RAY91 - Product Dimensions - Raymic Handset; Mounting; Tools Required for Installation; Mounting the Base Station

Productdimensions-Raymichandset
TheRaymichandsetdimensionsforbothcradle
mountingandclipmountingareprovided.
TheRaymichandsetisfittedwithacoiledcable.Ensure
sufficientspaceisavailablebelowthedesiredmounting
areatoaccommodatethecable.
3.4Mounting
Toolsrequiredforinstallation
1.Powerdrill
2.Pozi-drivescrewdriver
3.Adhesivetape
4.Suitablesizedrillbit
5.89mm(3½in)Holesaw(usedforspeakermounting)
6.File(forspeakercut-out)
MountingtheBasestation
FollowthestepsbelowtomounttheBasestation.
BeforemountingtheBasestationensurethatyouhave:
•selectedasuitablelocation(aclear,flatsurfaceis
required).
•identifiedthelocationforadditionalcomponents,such
astheHandsetorSpeakeretc.
•identifiedtherelevantcableconnectionsandroute
thatthecableswilltake.
1.Usingthesuppliedmountingtemplate,markthe
locationofthefixingholesonthemountingsurface.
2.Drillholesforthemountingfixingsusingadrillwith
asuitablesizeddrillbit.
3.Screwthefixingsapproximatelyhalfwayintothe
holesinthemountingsurface.
4.PlacetheBasestationoverthefixingsscrewsand
pushdowntolockintoposition.
5.Fullytightenthescrews.
6.Connectthenecessarycables.
22