Raymarine RAY91 - GNSS (GPS) Set up; Enabling and Disabling the Internal GNSS (GPS); No GPS Position Data; Entering Position Manually

5.14GNSS(GPS)setup
IfyourradioincludesaninternalGNSS(GPS)receiveror
ifyourradioisconnectedtoareceiveroverNMEA0183
orSea T alkng®,theradiocandisplayrelevantposition
information.
Thefollowinginformationcanbedisplayed:
•latitude
•longitude
•UTCtime
•COGandSOG
Whenpositiondataisavailablethesatelliteiconis
displayedonscreen.
Ifnopositiondataisavailablethenthelatitude,longitude
andtimecanbeenteredmanuallysothatitcanbe
includedinDSCdistresstransmissions.
Positiondatareceivedfromothervesselscanbe
displayedonaconnectedRaymarine®multifunction
display.
Enablinganddisablingtheinternal
GNSS(GPS)
FromtheGPSset-upmenu:
Menu>Set-up>GPS
set-up
1.Select
InternalGPS.
SelectingInternalGPSwillswitchtheinternalGNSS
(GPS)receiverOnandOff.
NoGPSpositiondata
IfnoGPSdataisavailableorGPSdatabecomes
unavailable;after10minutesanaudiblewarningis
sounded,theGPSiconflashesandtheNopositiondata
messageisdisplayed.
OncethewarninghasbeenacknowledgedtheGPS
iconwillcontinuetoflash.TheNopositiondata
warningisrepeatedevery4hoursifpositiondataisstill
unavailable,hasnotbeenenteredmanuallyorhasbeen
enteredmanuallybutover23.5hoursago.
Ifpositiondatahasbeenenteredmanuallythedisplay
alternatesbetweendisplayingthemanualpositionand
timeandtheManualPositionmessage.ifthemanually
enteredpositionhasnotbeenupdatedinthelast4
hourstheGPSiconflashesandanaudiblewarningis
sounded.Thiswarningwillberepeatedevery4hours
untilpositionismanuallyupdatedorGPSpositiondata
becomesavailable.
Wherenopositiondataisavailableorhasnotbeen
manuallyupdatedfor23.5hoursthenpositiondatawill
changeto‘9’sandtimewillchangeto‘8’s.
Enteringpositionmanually
IfGPSpositiondataisnotavailableitcanbeentered
manually.
Fromthe
GPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectSetmanualposition.
The Manual position screen requires you to input
latitude, longitude and UTC time.
2.UsetheRotaryknobtocyclethroughtheavailable
numbersandpress
OKtoconfirmeachnumberand
movetothenextdigit.
3.Whentherelevantinformationhasbeenentered
select
OKtoconfirmthedetails.
SelectingGPSinformationtodisplay
Y oucanchangetheGPSdatathatisdisplayedonthe
Homescreen.
Fromthe
GPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectHomescreendisplay.
2.Selecttherequiredoption:
• Location & time
• Location & COG/SOG
TheHomescreendisplayoptionisalsoavailablefrom
the
Displayset-upmenu
Settingtimeformatandoffset
Y oucanchangetheFormatandOffsetthatisappliedto
thetimedisplayedonscreen.
Fromthe
Unitsmenu:Menu>Set-up>Units.
1.SelectTimeformat.
2.Selectthedesiredformat:
•12hour
•24Hour(default)
3.Select
Timeoffset.
4.Adjusttheoffsettothedesiredvalueusingthe
RotaryknobortheChannelUpandChannelDown
buttons.
5.SelectOKtoconfirmtheselection.
42